SMALL ARMS REPAIRER
Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is:
The ability to do the work of a SMALL ARMS REPAIRER, without more than normal supervision as demonstrated by:
1) Disassembling, cleaning, and performing maintenance on small arms such as revolvers, automatic pistols, shot guns and rifles; 2) Assembling small arms in accordance with instructions and manually; and 3) Reordering items or equipment (e.g., weapons, ammunition, explosives) for stock replenishment. NOTE:
This information must be supported in your resume to be considered for the position. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements and https:
//www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=WG-6600 Must meet OPNAVINST 3591.1F Psychiatric Illness requirements. A wavier shall not be recommended for any individual with a diagnosis of psychosis or bipolar disorder for which anti-psychotic or mood stabilizing (including anti-convulsing) medication is necessary. Must be able to read, legibly write, and speak English. Must be 21 years of age or older. Must obtain firearms qualifications within three months of appointment, and must pass periodic re-qualifications as required by Navy instruction. Must complete a Qualification to Possess Firearms or Ammunition Form, DD 2760. Completion of this form is necessary to obtain information to determine if the employee has been convicted of a crime of domestic violence which would disqualify him/her from shipping, transporting, possessing or receiving either Government-issued or private firearms or ammunition and to determine if reassignment, reclassification, detail or other administrative action is warranted. Must be able to obtain a Commercial drivers license (CDL) with hazardous materials endorsement within the first six months of employment, and continually maintain a valid driver's license. Failure to maintain a valid drivers license may result in termination of employment. Incumbents attend formal, on the job, and in service training which may include:
Weapons Qualification, Firearms Instructor, Range Safety Officer/Line coach, Explosives Safety, Explosive Driver, Motor Vehicle and Rail car Inspector, Ammunition Supply Administration, Range Facility management Support system (RFMSS), Ordinance Inventory System (OIS) and other courses of instruction as directed. This position may be required to provide practical firearms training to Naval Security Force personnel using either the FATS or PRIM firearms training system. OTHER CONDITIONS OF EMPLOYMENT:
You will be required to obtain and maintain various training, licensing, and certifications:
Explosive/Hazardous Materials Driver Material Handling Equipment Operator Naval Motor Vehicle and Railcar Inspector Basic Explosive Safety (AMMO-18), Explosive Safety for Supervisors (AMMO-49) Ordnance Handling Team Leader First Aid First Responder Navy Handgun Qualification Course Small Arms Range Safety Officer/Line Coach, Electrical Explosive Safety (AMMO-29) Emergency Vehicle Operator Performance Oriented Packaging Program Ammunition Supply Administration (ASA) Course Naval Motor Vehicle and Railcar Inspection (AMMO-51) Course Performance Qualification Standards certification for small arms preventative maintenance Ballistic Vest and ASF Academy training
Estimated Salary: $20 to $28 per hour based on qualifications.
The ability to do the work of a SMALL ARMS REPAIRER, without more than normal supervision as demonstrated by:
1) Disassembling, cleaning, and performing maintenance on small arms such as revolvers, automatic pistols, shot guns and rifles; 2) Assembling small arms in accordance with instructions and manually; and 3) Reordering items or equipment (e.g., weapons, ammunition, explosives) for stock replenishment. NOTE:
This information must be supported in your resume to be considered for the position. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at:
https:
//www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements and https:
//www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=WG-6600 Must meet OPNAVINST 3591.1F Psychiatric Illness requirements. A wavier shall not be recommended for any individual with a diagnosis of psychosis or bipolar disorder for which anti-psychotic or mood stabilizing (including anti-convulsing) medication is necessary. Must be able to read, legibly write, and speak English. Must be 21 years of age or older. Must obtain firearms qualifications within three months of appointment, and must pass periodic re-qualifications as required by Navy instruction. Must complete a Qualification to Possess Firearms or Ammunition Form, DD 2760. Completion of this form is necessary to obtain information to determine if the employee has been convicted of a crime of domestic violence which would disqualify him/her from shipping, transporting, possessing or receiving either Government-issued or private firearms or ammunition and to determine if reassignment, reclassification, detail or other administrative action is warranted. Must be able to obtain a Commercial drivers license (CDL) with hazardous materials endorsement within the first six months of employment, and continually maintain a valid driver's license. Failure to maintain a valid drivers license may result in termination of employment. Incumbents attend formal, on the job, and in service training which may include:
Weapons Qualification, Firearms Instructor, Range Safety Officer/Line coach, Explosives Safety, Explosive Driver, Motor Vehicle and Rail car Inspector, Ammunition Supply Administration, Range Facility management Support system (RFMSS), Ordinance Inventory System (OIS) and other courses of instruction as directed. This position may be required to provide practical firearms training to Naval Security Force personnel using either the FATS or PRIM firearms training system. OTHER CONDITIONS OF EMPLOYMENT:
You will be required to obtain and maintain various training, licensing, and certifications:
Explosive/Hazardous Materials Driver Material Handling Equipment Operator Naval Motor Vehicle and Railcar Inspector Basic Explosive Safety (AMMO-18), Explosive Safety for Supervisors (AMMO-49) Ordnance Handling Team Leader First Aid First Responder Navy Handgun Qualification Course Small Arms Range Safety Officer/Line Coach, Electrical Explosive Safety (AMMO-29) Emergency Vehicle Operator Performance Oriented Packaging Program Ammunition Supply Administration (ASA) Course Naval Motor Vehicle and Railcar Inspection (AMMO-51) Course Performance Qualification Standards certification for small arms preventative maintenance Ballistic Vest and ASF Academy training
- Department:
6610 Small Arms Repairing - Salary Range:
$20.98 to $24.49 per hour
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
